Canopy Duct Cleaning Melbourne
Singhz Clean Air Filters provides canopy duct cleaning in Melbourne for restaurants, cafés, hotels, takeaway shops, and commercial kitchens across Victoria. Our service removes accumulated grease, cooking oil, and carbon deposits from kitchen exhaust ducts, horizontal ductwork, vertical risers, and ventilation passages to reduce fire hazards and maintain airflow.
What’s Included
Our Duct Cleaning Services
Horizontal Duct Cleaning
We remove grease, oil residue, and carbon deposits from accessible horizontal duct sections using suitable scraping tools, degreasers, and mechanical cleaning equipment.
Vertical Duct & Riser Cleaning
Our vertical duct cleaning service targets grease deposits on accessible internal duct walls, joints, and riser sections. Cleaning helps reduce combustible residue inside concealed kitchen ventilation systems.
Exhaust Duct Access Panel Cleaning
Access panels allow inspection and cleaning of internal ductwork without dismantling the entire ventilation system. We clean accessible duct sections through existing inspection panels, including surrounding internal surfaces and areas where grease collects. Panels are refitted after cleaning to maintain the integrity of the exhaust system.
Kitchen Exhaust Grease Removal
Our kitchen exhaust duct degreasing service removes hardened grease, oil deposits, and cooking residue from accessible duct surfaces. The cleaning method depends on the duct configuration, grease thickness, and access conditions.
How it Works
6-Steps Cleaning Process
1
Initial inspection
Inspect the exhaust duct layout, horizontal sections, vertical risers, access panels, and grease accumulation to determine the cleaning requirements.
2
Preparation
Isolate the relevant extraction equipment, protect nearby cooking appliances, and prepare safe access to the ductwork.
3
Access Panel Opening
Open existing duct inspection panels and identify internal sections requiring grease removal.
4
Grease Scraping
Remove thick grease layers, cooking oil deposits, and hardened residue using suitable manual scraping and mechanical cleaning tools.
5
Duct Degreasing
Apply appropriate commercial degreasers and cleaning methods to remove remaining grease from accessible duct walls, bends, and joints.
6
Final inspection
Inspect cleaned sections, remove collected waste, and refit access panels. Identify areas requiring additional cleaning or maintenance.
About the Access
Why Kitchen Exhaust Duct Access Is Important
Commercial kitchen exhaust ducts often run through ceiling voids, service shafts, wall cavities, and rooftop spaces. Unlike rangehood surfaces, these internal duct sections are usually concealed from everyday kitchen inspections.
Grease can accumulate inside horizontal runs, vertical risers, and duct bends even when the visible canopy is clean. Without suitable access panels, some sections may be difficult or impossible to inspect and clean properly.
The AIRAH Commercial Kitchen Exhaust Management Best Practice Guide identifies duct routing, access panels, duct enclosures, and exhaust fan locations as important parts of kitchen exhaust system inspections.
Access requirements depend on the duct layout, length, dimensions, and building configuration. Where existing panels do not provide sufficient access, additional inspection openings may need to be installed by a suitably qualified contractor.
Regular duct inspection and grease removal help businesses identify concealed grease buildup and maintain their commercial kitchen exhaust systems.
Frequently Asked Questions
How often should commercial kitchen exhaust ducts be cleaned?
Cleaning frequency depends on cooking volume, grease accumulation, operating hours, and the type of cooking equipment. High-volume kitchens using deep fryers, grills, and wok burners may require more frequent cleaning. Duct inspections and maintenance should follow applicable requirements, including AS 1851 where relevant.
Can exhaust ducts be cleaned without access panels?
Some duct sections may be accessible through existing system openings. However, concealed ductwork often requires dedicated access panels for thorough inspection and cleaning. Additional access openings may be necessary where internal sections cannot be reached safely.
How much does canopy duct cleaning cost in Melbourne?
The average cost of canopy duct cleaning in Melbourne is between $50 – $80 AUD per hour. This depends on duct length, system configuration, grease accumulation, accessibility, and the number of extraction systems. Kitchens with extensive ductwork, rooftop equipment, or limited access may require additional cleaning time.
Contact Us
- 97 Moriah Street Clayton, VIC, 3168
- 0380809210
- [email protected]






